间隙环流作用下的转子动力学性能分析

为研究间隙环流对转子动态性能的作用规律,根据流体的连续定理和动量定理建立了描述间隙环流运动规律的偏微分方程组,采用线性摄动方法将间隙环流内流体压力的稳态量和动态量分离,求解得到间隙环流动态作用力的表达式.为验证该流场计算模型,搭建了一个实验装置.使用有限元方法建立实验台干转子的动力学模型,通过实验测试干转子的固有频率,对动力学模型中法兰连接处的接触刚度等参数进行标定.将间隙环流的动态作用力分解为质量矩阵、刚度矩阵、阻尼矩阵的形式,施加到干转子动力学模型上,得到湿转子的动力学模型.求解该模型得到转子的动力学特征参数对于转子转速的变化规律.通过对间隙环流试验模型进行计算和实验测试,验证了该模型的有效性.研究结果表明,间隙环流能显著降低转子的固有频率,并能够在一定的转速范围内造成转子失稳.     

Utility-optimization dynamic subcarrier allocation algorithm for SC-FDMA systems

Two utility-optimization dynamic subcarrier allocation （DSA） algorithms are designed for single carrier frequency division multiple access system （SC-FDMA）. The two proposed algorithms aim to support diverse transmission capacity requirements in wireless networks, which consider both the channel state information （CSI） and the capacity requirements of each user by setting appropriate utility functions. Simulation results show that with considerable lower computational complexity, the first utility-optimization algorithm can meet the system capacity requirements of each user effectively. However, the rate-sum capacity performance is poor. Furthermore, the second proposed utility-opti- mization algorithm can contribute a better trade-off between system rate-sum capacity requirement and the capacity requirements of each user by introducing the signal to noise ratio （SNR） informa- tion to the utility function based on the first utility-optimization algorithm, which can improve the us- er requirements processing capability as well as achieve a better sum-rate capacity.     

Experimental study of fatigue degree quantification for multi-feature fusion identification

A comprehensive quantification method of fatigue degree is proposed concerning subjective and objective quantifications. Using the fatigue degree test software, fatigue degree is objectively quanti- fied by analyzing the reaction and operation abilities of drivers about traffic signals. By comparison experiment with that EEG signal based, multivariate statistical analysis and fusion identification based on BP neural network （ BPNN） results show that the experimental procedure is simple and practical, and the proposed method can reveal the correlation between fatigue feature parameters and fatigue degree in theory, and also can achieve accurate and reliable quantification of fatigue degree, especially under the associated action of multiple fatigue feature parameters.     

Error propagation determined iterative channel estimation with ICI mitigation for fast time-varying OFDM channels

The intersubcarrier interference （ICI） degrades the performance of the pilot-aided channel estimation in fast time-varying orthogonal frequency division multiplexing （OFDM） systems.To solve the error propagation in joint channel estimation and data detection due to this ICI,a scheme of error propagation determined iterative estimation is proposed,where in the first iteration,Kalman filter based on signal to interference and noise is designed with ICI transformed to be part of the noise,and for the later iterations,a determined iterative estimation algorithm obtains an optimal output from all iterations using the iterative updating strategy.Simulation results present the significant improvement in the performance of the proposed scheme in high-mobility situation in comparison with the existing ones.     

广东省LED驱动电源专利竞争力分析

利用国家知识产权局互联网检索数据库SooPat专利数据库,采集2004年1月1日至2013年12月31日期间的LED驱动电源技术专利文献,建立LED驱动电源专利数据库．再选择国家知识产权局专利信息服务平台分析系统分别从专利申请区域分布、IPC技术类别分布和专利申请人分布等方面,对LED驱动电源技术专利进行了深入的分析,提出了发展广东省LED驱动电源技术的专利策略．     

单轴各向异性左手介质填充波导截止特性的FDTD分析

给出用时域有限差分(finite-difference time-domain,FDTD)法分析单轴各向异性左手介质填充波导问题的差分公式.为验证递推公式的正确性和有效性,计算了各向同性左手介质填充矩形波导TE模归一化截止频率,计算结果与文献报道吻合较好;分析了介质厚度以及介质的相对磁导率对部分各向同性及各向异性左手介质填充矩形波导TE模归一化截止频率的影响.     

索－桥耦合参数振动分析

运用哈密顿原理求得了索－桥耦合非线性振动方程组,并运用龙格－库塔数值分析法进行分析计算,利用MATLAB 得到了频率比、激励振幅、拉索阻尼比、桥面阻尼比对参数振动的影响,对拉索的减振具有重要意义。     

基于高频脑电非线性动力学参数的疾病诊断专家系统研究

应用非线性动力学四个参数对脑电信号进行特征提取,应用BP人工神经网络分析了动力学参数与脑功能障碍以及疾病的关系,采用Visual C#.NET 2005、MS SQL Server 2005和Matlab 7.0技术构建了基于非线性动力学参数的疾病诊断专家系统.通过对该系统进行测试,初步达到根据相关事件的高频脑电信号对实验组和对照组人群进行鉴别分类的目的,从而初步达到病人和正常人的分类效果.     

逆变式高频窄脉冲微弧氧化电源的设计

为增强微弧氧化过程中电弧的可控性,从脉冲能量控制角度,设计了一种逆变式高频窄脉冲微弧氧化电源.该电源在传统的两级逆变电路结构基础上,增加了阻抗匹配电路,实现了变极性模式下回路及负载中能量的快速释放与存储.文中还详述了实现多种模式输出的协同控制策略及对应的电路工作模式,分析了电源的负载特性,并通过仿真和实验波形验证了该负载特性等效模型的有效性.实验结果表明,通过提高电源输出脉冲频率(最高20 k Hz)及减小脉冲宽度(最窄20μs),可实现对脉冲能量的精密控制和提高系统的能量利用率;高频窄脉冲处理模式获得的膜层表面孔隙率和表面粗糙度更低.     

融合GMM及SVM的特定音频事件高精度识别方法

针对特定音频事件识别中持续时间特别短的音频事件漏检概率高、识别速度较慢的问题,提出一种融合高斯混合模型（GMM）及支持向量机（SVM）的特定音频事件识别算法. 该方法利用GMM的统计分布描述能力和SVM的推广泛化能力,将GMM和SVM分别识别的结果进行融合处理,以手枪、步枪、机关枪等10类以上枪声为实验数据,无需针对每种枪声生成相应的识别模板,仅需训练生成2个识别模板. 实验结果表明,识别准确率达到92.71%. 该方法模板数量少,不需要多次训练,算法复杂度较低,不仅便于应用而且可大幅提升识别效率.